TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 55 of 936
TM 9-2350-261-20-3 REPLACE DRIVER’S POWER PLANT ACCESS PANEL 0430 00 THIS WORK PACKAGE COVERS: Removal (page 0430 00-1). Installation (page 0430 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) M a t e r i a l s / P a r t s Cotter pin (4) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s WP 0120 00 E q u i p m e n t C o n d i t i o n Engine stopped/shutdown (see your -10) Carrier blocked (see your -10) REMOVAL NOTE If decals and plates on panel need replacin g, see W P 0511 00. 1. Unscrew four T-bolts (1). Remove driver’s access panel (2) from hull. NOTE Remove seal only if damaged. 2. Bend back seal support to remove seal (3). 3. Remove four cotter pins (4), T-bolts (1), washers (5), and clamps (6) from hull. Discard cotter pins. 4. Remove four screws (7) and washers (8) from hull. 0430 00-1