TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 537 of 936
TM 9-2350-261-20-3 REPLACE RAMP LINKAGE (M1064 ONLY) 0560 00 THIS WORK PACKAGE COVERS: Removal (page 0560 00-1). Clean, Inspect, and Repair (page 0560 00-3). Installation (page 0560 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) M a t e r i a l s / P a r t s C otter pin (4) K ey washer ( 4) Locknut Lockwasher (2) Square washer P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s WP 0559 00 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Ramp lowered (see your -10) On right side only, mortar ammunition racks removed (WP 0507 00) REMOVAL NOTE Removal and installation of ramp linkage are the same for both sides of carrier. Text is for one side only. 1. Remove cotter pin (1), headed pin (2), and connecting link (3) from arm (4). Discard cotter pin. 2. Remove cotter pin (5), headed pin (6), and connecting link (3) from clevis (7). Discard cotter pin. 3. Loosen locknut (8). Remove clevis (7) and locknut from rod (9). Discard locknut. 0560 00-1