TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 530 of 936
TM 9-2350-261-20-3 ADJUST RAMP LOCK (M1064 ONLY) — Continued 0559 00 ADJUSTMENT WARNING Falling ramp could cause severe injuries. Keep personnel clear of ramp area. 1. Lower ramp (see your -10). 2. Remove cotter pin (1) and headed pin (2) from clevis (3). Discard cotter pin. 3. Disconnect link (4) from clevis (3). 4. Swing lever (5) forward. If catch (6) does not engage with striker (7), adjust catch (Step 5). If catch and striker adjustment is correct, go to Step 7. NOTE Install the same number of flat washers (8) on each side of all four supports (9). 5. To adjust catch (6) and striker (7), remove eight screws (10) and key washers (11) from four supports (9). Discard key washers. Install new flat washers (8) to shim between supports (9) and hull top plate. 0559 00-2