Sign up to sell your inventory with NSN Lookup

TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 502 of 936

TM 9-2350-261-20-3 REPLACE/REPAIR ANTENNA MAST BRACKET ASSEMBLY, TAILLIGHT WIRING HARNESS, AND ANTENNA MAST BASE ASSEMBLY (M1068 ONLY) — Continued 0554 00 1. Install new rubber pads (2) on antenna mast brackets (1) and (3). a. Apply a thin, even coat of adhesive to the rubber pad surfaces (2). Allow to dry 20 to 40 minutes. Apply a thin, even coat of adhesive to the inside of the brackets (1) and (3). Allow to dry 30 to 120 seconds. Press the surfaces of the rubber pads and brackets with the adhesive on them together firmly. 2. Install stationary part of antenna mast (1) to right rear of hull. a. Install antenna mast (1), four washers (2), ground lead (8), and four screws (3) to right rear of hull. 3. Install hinged portion of antenna mast (4). a. Install antenna mast (4), hinge pin (5), washer (6), and new cotter pin (7). 0554 00-8