TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 499 of 936
TM 9-2350-261-20-3 REPLACE/REPAIR ANTENNA MAST BRACKET ASSEMBLY, TAILLIGHT WIRING HARNESS, AND ANTENNA MAST BASE ASSEMBLY (M1068 ONLY) — Continued 0554 00 NOTE If catches or strikes are damaged, do Step 10a or Step 10b. 10. Unlatch two catches (11) on antenna mast bracket (4). a. Remove four screws (12), lockwashers (13), and two strikes (14) from antenna mast bracket (4). Check catches (11) for damage. Discard lockwashers. b. Drill out four rivets (15) securing two catches (11) to bracket (4). Remove and discard catches and rivets. 11. Remove hinged portion of antenna mast bracket (1). a. Remove cotter pin (2), washer (3), hinge pin (4), and the front portion of antenna mast bracket (1). Discard cotter pin. 12. Remove four screws (5), washers (6), ground lead (8), and that portion of the antenna mast bracket (7) against the right rear hull. 0554 00-5