TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 486 of 936
TM 9-2350-261-20-3 REPLACE TRIPOD STOWAGE BRACKETS (M901A1 ONLY) — Continued 0551 00 REMOVAL 1. Remove cotter pin (1), headed straight pin (2), and restraining strap (3) from tripod plate strap (4). 2. Remove two screws (5), washers (6), locknuts (7), and support shims (8) from lower support bracket (9) and support channel (10). Remove support bracket from support channel. Discard locknuts. 3. Remove two screws (11), washers (12), six washers (13), and tripod plate strap (4) from lower support bracket (9). 4. Remove three screws (14), lockwashers (15), and spacers (16) from lower support bracket (9). Remove lower support bracket from carrier. Discard lockwashers. 5. Remove two screws (17) and washers (18) from support channel (10) and floorboard. Remove support channel and support cushion (19) from under floorboard. 6. Remove two cotter pins (20), washers (21), and cap pivot pin (22) from tripod tiedown cap (23) and tripod tiedown arm (24). Remove tripod tiedown cap from tripod tiedown arm. Discard cotter pins. 0551 00-2