TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 483 of 936
TM 9-2350-261-20-3 REPLACE LAUNCH TUBE STOWAGE BRACKET (M901A1 ONLY) 0550 00 THIS WORK PACKAGE COVERS: Removal (page 0550 00-1). Installation (page 0550 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) M a t e r i a l s / P a r t s Cotter pin Lockwasher (10) P e r s o n n e l R e q u i r e d Unit Mechanic E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Launch tube removed (see your -10) REMOVAL 1. Remove cotter pin (1), headed straight pin (2), strap (3), and upper support (4). Remove strap. Discard cotter pin. 2. Remove four nuts (5), lockwashers (6), washers (7), screws (8), and washers (9) from upper support (4) and bracket (10). Remove support from bracket. Discard lockwashers. 3. Remove two screws (11), lockwashers (12), and washers (13) from bracket (10) and hull (14). Remove bracket. Discard lockwashers. 4. Remove pin (15), four screws (16), and washers (17) from lower support (18) and plate (19). Remove lower support. 5. Remove four screws (20), lockwashers (21), two spacers (22), and two spacers (23) from plate (19) and hull. Remove plate. Discard lockwashers. 0550 00-1