TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 428 of 936
TM 9-2350-261-20-3 REPLACE RIGHT SIDE RACK BASE (M1068 ONLY) — Continued 0531 00 REMOVAL 1. Remove four screws (1) and bumper (2) from base extension (3). 2. Remove three screws (1) and bumper (2) from base (4). 3. Loosen nut (5) and lockwasher (6) from bolt (7) securing base extension (3). Raise base extension (3) and position on base (4). Discard lockwasher. 4. Remove 12 screws (8) and hinge (9) from base extension (3) and base (4). 5. Remove locknut (10), screw (11), two washers (12), and bolt (7) from base extension mount (13). Discard locknut. 6. Remove four screws (14), washers (15), and base extension mount (13) from right sponson. 7. Remove two locknuts (16), screws (17), and four washers (18) from base (4) and sponson. Discard locknuts. 8. Remove three screws (19), washers (20), and base (4) from bulkhead mounts. 0531 00-2