TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 361 of 936
TM 9-2350-261-20-3 REPLACE HORIZONTAL AMMUNITION RACK (M1064 ONLY) — Continued 0507 00 INSTALLATION WARNING Rear trays of ammo rack could collapse when removed. To prevent injury, move ammo rack from the front. Keep fingers away from spaces between trays on the back of ammo rack. 1. Position horizontal ammunition rack (1) on sponson. Jam rack against other rack, if installed. Have helper assist. 2. Install two screws (2), washers (3), and vertical posts (4) on sponson. NOTE Start installation of 18 screws inside hull from top and work down. Rack mounting holes may be elongated to 3/16 inch (5 mm) to match hole pattern. 3. Install 18 screws (5) and washers (6) in rack assembly (1) and side hull. 4. Position two brackets (7) against hull top plate and top of rack (1). Install four screws (8) and washers (9) in brackets (7) and hull top plate. Close all ammo doors. 0507 00-3