Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 354 of 936

TM 9-2350-261-20-3 REPLACE TENT AND FRAME MOUNTS (M577A2 ONLY) — Continued 0505 00 3. Install two clamps (6) and hand screws (7) on brackets (8). Secure with two washers (9), nuts (10), and new cotter pins (11). 4. Install two retainers (12) on brackets (8). Secure with two screws (13), washers (14), and new locknuts (15). 5. Align two brackets (8) on rear bulkhead. Secure with four washers (16) and screws (17). TIGHTEN SCREWS TO 60-65 LB-FT (81-88 N·M) TORQUE. Use torque wrench. 6. Align two end fittings (18) with rear bulkhead lugs. Secure with two screws (19), eight washers (20), and two new locknuts (21) FOLLOW-THROUGH STEPS 1. Install tent frame on carrier (see your -10). 2. Raise and lock ramp (see your -10). 3. Stop engine (see your -10). END OF TASK 0505 00-4