TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 351 of 936
TM 9-2350-261-20-3 REPLACE TENT AND FRAME MOUNTS (M577A2 ONLY) 0505 00 THIS WORK PACKAGE COVERS: Removal (page 0505 00-1). Installation (page 0505 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) Torque wrench (WP 0780 00, Item 104) M a t e r i a l s / P a r t s Cotter pin (2) Locknut (2) Locknut (2) P e r s o n n e l R e q u i r e d Unit Mechanic E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) Tent frame removed from carrier (see your -10) REMOVAL 1. Remove two locknuts (1), eight washers (2), two screws (3), and two end fittings (4) from rear bulkhead lugs. Discard locknuts. 2. Remove four screws (5), washers (6), and two brackets (7) from rear bulkhead. 3. Remove two locknuts (8), washers (9), screws (10), and retainers (11) from brackets (7). Discard locknuts. 4. Remove two cotter pins (12), nuts (13), washers (14), hand screws (15), and clamps (16) from brackets (7). Discard cotter pins. 0505 00-1