TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 335 of 936
TM 9-2350-261-20-3 REPLACE RIGHT REARWARD TABLE (M577A2 ONLY) — Continued 0500 00 INSTALLATION 1. Install four bumpers (1) in braces (2). 2. Install four braces (2) on supports (3), (4), (5), and (6). Secure with 12 screws (7), washers (8), and new locknuts (9). 3. Install four supports (3), (4), (5), and (6) and hinges (10) on table top (11). Secure with eight spacers (12) and 16 screws (13). NOTE Shims might be required to obtain clearance between screw and support bracket. (Use flat washers as shims, two maximum.) 4. Install table top with supports on hull. Secure with two screws (14), washers (15), and new locknuts (16). 5. Install three screws (17) through table top and brackets on hull. Secure with three washers (18) and nuts (19). 6. Install four catches (20) on two drop leaves (21) Secure with eight new lockwashers (22) and screws (23). 7. Install two drop leaves (21) on hinges (10) Secure with eight spacers (24) and 16 screws (25). FOLLOW-THROUGH STEPS 1. Raise and lock ramp (see your -10). 2. Stop engine (see your -10). END OF TASK 0500 00-3/4 blank