TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 30 of 936
TM 9-2350-261-20-3 REPLACE TOW CABLE PAD — Continued 0420 00 INSTALLATION WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. Apply a thin coat of adhesive to hull and back of new pad (1). 2. Allow adhesive to dry for 10 to 20 minutes. Surface should be tacky, but not too sticky. 3. Position pad (1) on hull surface and press firmly in place. FOLLOW-THROUGH STEPS 1. Install tow cable (see your -10). END OF TASK 0420 00-2