TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 289 of 936
TM 9-2350-261-20-3 REPLACE/REPAIR RADIO OPERATOR’S SEAT (M1068 ONLY) — Continued 0489 00 11. Remove two locknuts (1), screws (2), washers (3), and rack (4) from support plate (5). Discard locknuts. 12. Remove four screws (6), locknuts (7), eight washers (8), and support plate (5) from tube (9). Discard locknuts. 13. Pull handle (10) and push tube (9) down to its lowest position. Hold rod (11) and remove locknut (12) and washer (13) from rod. Discard locknut. WARNING Apply pressure on tube to prevent spring from releasing when handle is pulled out. Injury to personnel can result from flying tube and spring. 14. While pushing down on tube (9), pull out handle (10) and slowly allow spring (14) to expand. 15. Remove rod (11), tube (9), and spring (14) from pedestal (15). 16. Remove pin (16), handle (10), spring (17), and washer (18) from tube (9). 0489 00-3