TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 259 of 936
TM 9-2350-261-20-3 REPLACE/REPAIR DRIVER’S SEAT POST ASSEMBLY — Continued 0483 00 11. Install two screws (17) into inboard holes and install plate (18) on post (19) with two screws (17), washers (20), and new locknuts (21). Tighten locknuts two turns only at this time. 12. Place spacers (22) between post (19) and plate (18) at the outboard holes. Install two screws (17) through spacers and plate. Secure with two washers (20) and new locknuts (21). C A U T I O N Take care not to tighten the locknuts too tight or the plate will bend. 13. Tighten two locknuts (21), installed in Step 11, just enough to bottom against plate (18). 14. Lower seat support (13) all the way down. Place stiffener (23) in post (19) and install cap (24). Secure with two screws (25) and new locknuts (26). 0483 00-7