Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 240 of 936

TM 9-2350-261-20-3 REPLACE DRIVER’S SEAT (ALL CONFIGURATIONS) — Continued 0478 00 INSTALLATION 1. Slide plate (1) into seat (2). 2. On old configuration seats, position plate (1) with seat on post assembly (3). Secure with four screws (4). 3. On new configuration seats, install absorber (5) on post assembly (6). Secure with four screws (7). 4. Position plate (1) on absorber (5). Secure with four screws (4). 5. Position seat rails (8) with mounting plate (1). Slide seat (2) to the rear. 6. Install seat lock rack (9) on seat mounting plate (1). Secure with two screws (10) and new locknuts (11). 7. Push seat back assembly (12) down into seat (2) until it locks into position. FOLLOW-THROUGH STEPS 1. Raise and lock ramp (see your -10). 2. Stop engine (see your -10). END OF TASK 0478 00-2