TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 24 of 936
TM 9-2350-261-20-3 REPLACE TOWING HOOK AND EYE PAD — Continued 0418 00 INSTALLATION NOTE The torque is different for the new style front towing eye pads. NOTE Two tow hooks (2) should be on the front eye pads (3). 1. Place eye pad (3) on rear of carrier. Secure with six screws (4). TIGHTEN SCREWS TO 130-140 LB-FT (176-190 N·M) TORQUE. Use torque wrench. NOTE Front towing eye pad is marked “TOP”. Use only the top six holes for securing the towing eye pad to the hull. The other holes are for future use. 2. Place front towing eye pad (3) on front slope of carrier. Secure with six screws (4). TIGHTEN SCREWS TO 151–166 LB-FT (205–225 N·M) TORQUE. Use torque wrench. 3. Install hook (2) on eye pad (3). Secure with pin (5) and clip (1). END OF TASK 0418 00-2