TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 227 of 936
TM 9-2350-261-20-3 REPLACE SIDE ARMOR (M901A1 ONLY) 0474 00 THIS WORK PACKAGE COVERS: Removal (page 0474 00-1). Installation (page 0474 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) Torque Wrench (WP 0780 00, Item 103) M a t e r i a l s / P a r t s Lockwasher (4) Lockwasher (5) Spring pin (2) P e r s o n n e l R e q u i r e d Unit Mechanic E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) REMOVAL NOTE Right and left side armor are replaced the same way. Left side shown. 1. Remove quick release pin (1) and place armor plate (2) in the down position. 2. Remove four screws (3), lockwashers (4), washers (5), two brackets (6), and armor plate (2) from deck. Discard lockwashers. 3. Remove two spring pins (7) and shoulder pins (8) from brackets (6) and armor plate (2). Discard spring pins. 4. Remove five screws (9), lockwashers (10), washers (11), and armor plate (12) from deck. Discard lockwashers. 0474 00-1