TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 223 of 936
TM 9-2350-261-20-3 REPLACE 4.2 KW GENERATOR SET ENCLOSURE (M577A2 ONLY) 0472 00 THIS WORK PACKAGE COVERS: Removal (page 0472 00-1). Installation (page 0472 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) Sling (WP 0780 00, Item 66) Torque Wrench (WP 0780 00, Item 103) M a t e r i a l s / P a r t s Cotter Pin (4) Locknut (2) P e r s o n n e l R e q u i r e d Unit Mechanic E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) 4.2 KW Generator set rem oved (M577A2 only) (see your -10) REMOVAL 1. Remove two locknuts (1), screws (2), washers (3), and washers (4) from two hull lugs. Discard locknuts. 2. Remove four screws (5), washers (6), and generator set enclosure (7) from bulkhead. 3. Remove four cotter pins (8) from thumbscrews (9). Discard cotter pins. 4. Remove four thumbscrews (9), washers (10), and clamps (11) from enclosure (7). WARNING Lifting or moving objects in excess of 70 lbs could injure you. Get an assistant or use a lifting device to move heavy objects. 5. Remove enclosure (7). Use lifting device and sling. 0472 00-1