TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 207 of 936
TM 9-2350-261-20-3 REPLACE MORTAR HATCH EXTERIOR CATCHES AND BUMPERS (M1064 ONLY) — Continued 0467 00 ADJUSTMENT 1. Adjust LEFT and CENTER exterior latches as follows: a. Open hatch sections. b. Loosen screws (1). Move latch bolt bracket (2) to get 5/8 in (16 mm) between end of bracket (2) and edge of catch (3). c. If above adjustment cannot be made, loosen screws (4) and move catch (3) to get above measurement. d. Remove or install shims (5) between bumper (6) and hull so that tee head bolt (7) protrudes into catch (3) a distance of 3/8 to 13/16 in (10 to 21 mm) with center door section firmly against bumper. e. Tighten screws (1) on bracket (2). f. TIGHTEN SCREWS (4) ON CATCH (3) AND TORQUE TO 360-420 LB-IN (41-47 N·M). Use torque wrench. 0467 00-5