TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 194 of 936
TM 9-2350-261-20-3 REPLACE CARGO HATCH DOOR (M113A2, M901A1, AND M1059 ONLY) — Continued 0464 00 INSTALLATION 1. Install two new short seals (1) and two new long seals (15) into hatch door. Press seals into place. 2. Install screw (17) in hatch door (16). Secure with new locknut (3). 3. Place plate(s) (4) and eye bracket (5) on hull top plate. Secure with two washers (6) and screws (7). TIGHTEN SCREWS TO 60–65 LB-FT (81–88 N·M) TORQUE. Use torque wrench. 4. Align hatch door (16) with hinge brackets. Install two gaskets (8) and shield (9). 5. Apply coat of grease to each leaf spring (10). Install nine leaf springs in shield (9). 6. Place hatch door (16) in vertical position. Install plate(s) (11) and bracket (12). Secure with two washers (13) and screws (14). TIGHTEN SCREWS TO 60–65 LB-FT (81–88 N·M) TORQUE. Use torque wrench. FOLLOW-THROUGH STEPS 1. Adjust latch (WP 0463 00). 2. Close cargo hatch door. Check that door is properly installed. END OF TASK 0464 00-4