TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 190 of 936
REPLACE CARGO HATCH INTERIOR LATCH — Continued ADJUSTMENT NOTE Cargo hatch cover should fit tightly and evenly along all four sides. 1. Remove or add washers (1) between two brackets (2) and the cargo hatch cover (3), as needed, to establish a proper seal and correct latch engagement. 2. If cargo hatch cover does not seal correctly, remove required number of washers (1), equally, from both brackets (2) to tighten seal. 3. If cargo hatch cover (3) is too tight to latch correctly, add required number of washers (1), equally, to both brackets (2) to obtain proper latch engagement. 4. Position bracket (2) so that latch (4) engages striker (5) within 3/8 to 5/8 inch (10-16 mm). 5. TIGHTEN EIGHT SCREWS (6) TO 22-24 LB-FT (30-37 N·M) TORQUE. Use torque wrench. END OF TASK 0463 00-6 0463 00 TM 9-2350-261-20-3