TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 140 of 936
TM 9-2350-261-20-3 REPAIR DRIVER’S HATCH (M901A1 ONLY) — Continued 0449 00 INSTALLATION 1. Install spacer (1), guide (2), two washers (3), and screws (4). 2. Install two shims (5), catch (6), two washers (7), new lockwashers (8), and screws (9). 3. TIGHTEN TWO SCREWS (9) TO 120-144 LB-IN (14-16 N·M) TORQUE. Use torque wrench (WP 0780 00, Item 100). WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. NOTE Before installing support (10) to deck, apply a .006-inch high and .12-inch wide bead of sealing compound around the hole through the deck for handle (11). Do not allow sealing compound to dry before installing support to deck. 0449 00-14