TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 125 of 936
REPLACE DRIVER’S HATCH LATCH AND BUMPER (ALL EXCEPT M901A1) — Continued NOTE Steps 7 - 12 apply to all carriers, except M577A2 and M1068. 7. Install block (19), four washers (18), two screws (16), and nuts (17) on hull bracket (20). 8. Install hook (15), two spacers (14), two springs (13), and two washers (12) on hull bracket. Secure with screw (11) and new locknut (10). NOTE Install washer(s), as needed, to compress bumper 1/4 inch (6 mm) when hold-open hook is engaged. 9. Install washer(s) (9) and bumper (8) on hull bracket. From inside carrier, secure with washer (7) and nut (6). 0448 00-5 0448 00 TM 9-2350-261-20-3