TM-9-2350-261-20-3 Unit Maintenance Manual Volume 3 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 106 of 936
TM 9-2350-261-20-3 REPLACE DRIVER’S HATCH INTERIOR LOCK AND LATCH — Continued 0445 00 ADJUSTMENT NOTE 1. Turn clevis (5) on eyebolt (4) until hatch closes tightly on hull in the latched position with maximum clearance of 3/32 inch (2 mm). Tighten nut (3). 2. Turn lug (2) until latch (6) is in line with clevis (5) or 1/4 inch (6 mm) maximum above clevis in the latched position. Tighten nut (1) on lug. FOLLOW-THROUGH STEPS 1. Close hatch. Check that hatch lock and latch are properly installed. END OF TASK 0445 00-4 Perform Steps 1 - 2 to adjust lock and latch.