TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 910 of 1012
TM 9-2350-261-20-2 ADJUST PIVOT STEER LINKAGE — Continued 0415 00 4. Pull master cylinder piston all the way in. 5. Turn two rod end bearings (1) until two screws (2) pass freely through two rod end bearings and two control handles (3). 6. Turn two rod end bearings (1) one turn to the left to lengthen two rods (4). Obtain 1/32 in (0.8 mm) clearance between master cylinder clevises (5) and master cylinder internal piston. 7. Install two rod end bearing (1) on control handles (3). Secure with two screws (2) and new locknuts (6). 8. Tighten locknuts (6) on rod end bearings (1). C A U T I O N Use FRH hydraulic fluid only (WP 0120 00). 9. Remove two master cylinder filler caps (7). Fill master cylinders to 1/2-3/4 in (13-19 mm) from top. Install filler caps. 0415 00-2