TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 900 of 1012
TM 9-2350-261-20-2 REPLACE PIVOT STEER MASTER CYLINDERS AND HOSES — Continued 0412 00 INSTALLATION 1. Install bellows (1) and clevis (2) in master cylinder (3). 2. Place master cylinder (3) on support (4). Secure with three screws (5) and new locknuts (6). 3. Install clevis (2) to levers and shaft (7). Secure with clevis pin (8) and new cotter pin (9). 4. Install new preformed packing (10) and elbow (11) in master cylinder (3). 5. Secure adapter (12), nut (13), and hose (14) to elbow (11). 6. Connect hose (14) to bulkhead elbow (15). 7. Bleed and fill pivot steer system (WP 0409 00). Install master cylinder filler cap (16). FOLLOW-THROUGH STEPS 1. Install driver’s seat (WP 0478 00). 2. Start engine (see your -10). Check for hydraulic leaks. 3. Raise and lock ramp (see your -10). 4. Operate carrier to check that brake system operates properly. 5. Stop/shutdown engine (see your -10). END OF TASK 0412 00-2