TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 893 of 1012
TM 9-2350-261-20-2 REPLACE PIVOT STEER HANDLES AND LINKS — Continued 0410 00 INSTALLATION 1. Install four nuts (1) on rod end bearings (2). 2. Install four rod end bearings (2) in two links (3). Do not tighten nuts. 3. Install two links (3) on bellcranks (4). Secure with four screws (5) and new locknuts (6). 4. Place two handles (7) in four mounts (8). Secure with two shafts (9) and four new cotter pins (10). 5. Install two links (3) on handles (7). Secure with two screws (5) and nuts (6). 6. Attach two springs (11) to handles (7) and brackets (12). 7. Adjust pivot steer linkage (WP 0415 00). 8. Tighten four nuts (1) that secure rod end bearings (2) to two links (3). 0410 00-3