TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 89 of 1012
TM 9-2350-261-20-2 REPLACE DRAIN CAP AND SIGHT GAUGE 0215 00 THIS WORK PACKAGE COVERS: Removal (page 0215 00-1). Installation (page 0215 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) Torque Wrench (WP 0780 00, Item 106) M a t e r i a l s / P a r t s Antiseize compound (WP 0782 00, Item 8) Non-electrical wire (WP 0782 00, Item 40) Packing (3) Suitable container P e r s o n n e l R e q u i r e d Unit Mechanic E q u i p m e n t C o n d i t i o n Engine stopped/shutdown (see your -10) Power plant rear access panel removed (WP 0431 00, WP 0432 00, or WP 0433 00) Carrier blocked (see your -10) REMOVAL NOTE Carrier may have a flat sight glass or a bubble sight glass. To remove flat sight glass, perform REMOVAL Steps 1 - 2. To remove bubble sight glass, perform REMOVAL Steps 1 - 3. 1. Place suitable container under drain cap (1). Remove cap, packing (2), and lockwire (3), and drain oil. Discard wire and packing. 2. Remove lockwire (4), four screws (5), washers (6), cover (7), and packing (8) from fan gearbox (9). Discard lockwire and packing. 3. Remove sight glass (10) and packing (11) from cover (7). Discard packing. 4. Remove filler plug (12) from fan gearbox (9). 0215 00-1