TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 882 of 1012
TM 9-2350-261-20-2 REPLACE RANGE SELECTOR LINKAGE — Continued 0407 00 ADJUSTMENT 1. Loosen locknut (1) on range selector link (2) at transmission cross-shaft (3) end. 2. Remove screw (4) and locknut (5) that secure range selector link (2) to cross-shaft (3). 3. Place range selector (6) in neutral position. 4. Pull transmission shift arm (WP 0404 00) to end of travel, then back one detent to place transmission in neutral. 5. Adjust range selector link bearing end (7) to free pin fit at transmission cross-shaft (3). 6. Check all range selector positions. Readjust range selector link bearing end (7), if needed, to obtain positive transmission detents in all positions. 7. Install range selector link (2) on transmission cross-shaft (3). Secure with screw (4) and new locknut (5). 8. Tighten locknut (1) on range selector link bearing end (7). 0407 00-4