TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 872 of 1012
REPAIR TRANSMISSION RANGE SELECTOR — Continued ASSEMBLY 1. Install shaft (1) and cam (2) in housing (3). Secure cam to shaft with new spring pin (4). 2. Install control lever assembly (5) and spring (6) in housing (3). Secure control lever to shaft (1) with pin (7) and new cotter pin (8). 3. Install lock (9) on control lever (5). Secure with new spring pin (10). 4. Install control rod (11), spring (12), and washer (13) in control lever (5). 5. Secure rod (11) to lock (5) and lever (5) with three new cotter pins (14). 6. Install neutral start switch (15) in housing (3). Secure with two screws (16), washers (17), new lockwashers (18), and nuts (19). 7. Install two pins (20) in housing (3). 8. Secure cover (21) to housing (3) with two screws (22). 9. Inst all r ange selector in carrier (WP 0404 00). 1 0. A djust ran ge selecto r lin kage (WP 0407 00). 11. Adjust neutral start switch (WP 0406 00). 0405 00-4 0405 00 TM 9-2350-261-20-2