TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 87 of 1012
TM 9-2350-261-20-2 REPLACE FAN DRIVE PULLEY AND ACCESS COVER 0214 00 THIS WORK PACKAGE COVERS: Removal (page 0214 00-1). Installation (page 0214 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) Torque Wrench Adapter (WP 0780 00, Item 8) Torque Wrench (WP 0780 00, Item 102) M a t e r i a l s / P a r t s Lockwasher (4) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s W P 02 11 00 E q u i p m e n t C o n d i t i o n Engine stopped/shutdown (see your -10) Carrier blocked (see your -10) Power plant rear access panel removed (WP 0431 00, WP 0432 00, or WP 0433 00) REMOVAL 1. Remove four screws (1), flat washers (2), lockwashers (3), and fan pulley access cover (4) from power plant compartment rear bulkhead. Discard lockwashers. 2. Remove fan drive belts (WP 0211 00). 3. Remove nut (5), screw (6), pulley (7), and key (8) from shaft (9). 0214 00-1