TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 868 of 1012
TM 9-2350-261-20-2 REPLACE TRANSMISSION RANGE SELECTOR — Continued 0404 00 INSTALLATION 1. Place range selector (1) on driver’s compartment bulkhead. Secure with three washers (2) and screws (3). 2. Install arm (4) on range selector (1). Secure with new spring pin (5). 3. Install link (6) on arm (4). Secure with screw (7) and new locknut (8). 4. Connect two electrical leads (9) and (10) to circuits 74 and 74A. FOLLOW-THROUGH STEPS 1. Install air cleaner housing and element (WP 0185 00). 2. Install driver’s power plant access panel (WP 0430 00) 3. Close power plant front access door and raise trim vane (see your -10). 4. Operate carrier to check that transmission range selector operates properly. 5. Stop/shutdown engine (see your -10). END OF TASK 0404 00-2