TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 864 of 1012
TM 9-2350-261-20-2 REPLACE FUEL CUTOFF CONTROL CABLE ASSEMBLY — Continued 0403 00 INSTALLATION 1. Feed control assembly (3) through mounting hole in driver’s compartment bulkhead to power plant front access door opening. 2. Slide washer (5) and nut (4) onto control assembly (3). Secure control assembly to driver’s compartment bulkhead. 3. Install control assembly (3) on three weldnuts (6). Secure with three clamps (7), washers (8) and screws (9). C A U T I O N Contact between the fuel shutoff cable and radiator coolant lines during operation of the carrier may cause melting of the plastic case on the fuel shutoff cable. 4. Remove slack from fuel shutoff cable so that it does not touch the auxiliary radiator tube. 5. Install control assembly (3) on differential bracket (10). Secure with clamp (11), screw (12), and new locknut (13). 6. Install pin (14) on fuel control arm (15). Secure with washer (16) and new cotter pin (17). 0403 00-4