TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 858 of 1012
TM 9-2350-261-20-2 REPLACE HAND THROTTLE — Continued 0402 00 REMOVAL 1. Remove two screws (1), washers (2), and four clamps (3) that secure throttle control cable assembly (4) to two weldnuts (5). 2. Remove two screws (6), locknut (7), lockwasher (8), two straps (9), and cable assembly (4) from weldnut (10). Discard locknut and lockwasher. 3. Rem ove cotter pin (11) and w asher (12). Disconnect pin ( 13) from accelerator ped al assem bly (14 ). D iscard cotter pin. 4. Loosen set screw (15). Remove collar (16) and pin (13) from cable assembly (4). 5. Pull cable assembly (4) through grommet (17) in driver’s floor plate and out through power plant front access door opening. Discard grommet. 6. Remove nut (18) and washer (19) that secure cable assembly (4) to driver’s compartment bulkhead. 7. Remove cable assembly (4) from driver’s compartment. 0402 00-2