TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 856 of 1012
TM 9-2350-261-20-2 ADJUST ACCELERATOR AND TRANSMISSION THROTTLE VALVE LINKAGE — Continued 0401 00 WARNING Adjusting accelerator linkage while the engine is running can cause your arm to be badly injured. Do not adjust accelerator linkage with the engine running. 8. Remove driver’s and rear power plant access panels (WP 0430 00, WP 0431 00, WP 0432 00, or WP 0433 00). 9. Loosen locknut (1). Remove screw (2) and nut (3) from throttle link (4) and transfer shaft (5). To decrease engine RPM at shift point, shorten throttle link (4) by turning rod end (6) to the right. To increase engine RPM at shift point, lengthen throttle link (4) by turning rod end (6) to the left. Attach throttle link (4) to transfer shaft (5) with screw (2) and nut (3). Tighten locknut(1). 10. Readjust accelerator pedal stops by repeating the following procedures: a. Adjust Idle Stop. b. Adjust Upper Accelerator Pedal Detent Stop. c. Adjust Upper Accelerator Pedal Toe Stop. d. Repeat Check Operation. FOLLOW-THROUGH STEPS 1. Engine stopped/shutdown (see your -10). END OF TASK 0401 00-10