TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 854 of 1012
TM 9-2350-261-20-2 ADJUST ACCELERATOR AND TRANSMISSION THROTTLE VALVE LINKAGE — Continued 0401 00 ADJUST UPPER ACCELERATOR PEDAL TOE STOP 1. Remove screw (1), nut (2), and throttle link (3) from outer transfer shaft (4). 2. Depress upper accelerator pedal (5) until transmission arm (6) is in full open position. 3. Adjust toe stop screw (7) in floor bracket (8) to 1/16 inch (2 mm) space between upper accelerator pedal (5) and screw. 4. Install throttle link (3) on outer transfer shaft (4). Secure with screw (1) and nut (2). 5. Adjust detent plunger if necessary. See ADJUST UPPER ACCELERATOR DETENT PLUNGER Steps 1 - 2. 6. Check operation of accelerator controls and transmission shift points. See CHECK OPERATION Steps 1 - 10. 0401 00-8