TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 853 of 1012
TM 9-2350-261-20-2 ADJUST ACCELERATOR AND TRANSMISSION THROTTLE VALVE LINKAGE — Continued 0401 00 ADJUST UPPER ACCELERATOR PEDAL DETENT STOP 1. Loosen locknut (1). Adjust stop screw (2) so detent plunger (3) will contact stop screw at full throttle position. 2. With pedal (4) in full throttle position, travel spring (5) should be compressed so a gap of 1/64 to 3/64 inch (0.4 to 1.0 mm) exists between pivot pin (6) and rod stop (7). 3. Adjust upper accelerator pedal toe stop. See ADJUST UPPER ACCELERATOR PEDAL TOE STOP Steps 1 - 4. 0401 00-7