TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 849 of 1012
TM 9-2350-261-20-2 ADJUST ACCELERATOR AND TRANSMISSION THROTTLE VALVE LINKAGE — Continued 0401 00 2. Remove two screws (6) and gauge (2) from governor (7). NOTE Gauge (2) is identified as part number 12269180 (NSN 5340-01-086-3243). 3. Install gauge (2) in adjustment position on governor (7). Secure with two screws (6). 4. Loosen screw (5) that secures governor throttle arm (1) to governor shaft (4). 5. Align hole in governor throttle arm (1) with hole in gauge (2). Insert screw (3) through throttle arm and gauge. 6. Insert 3/16 inch (5 mm) key socket head screw in plug on top of governor shaft (4). Turn to the right to rotate governor shaft (4) to full throttle position and hold. 7. Tighten screw (5) that secures throttle arm (1) to governor shaft (4). 8. Remove screw (3) inserted in Step 5 above. 9. Remove two screws (6) that secure gauge (2) to governor (7) and return gauge to stowed position. Secure gauge with two screws (6). 10. Connect throttle link (7) to governor throttle arm (1). Secure with screw (3) and nut (8). 0401 00-3