TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 846 of 1012
TM 9-2350-261-20-2 REPAIR UPPER ACCELERATOR LINKAGE — Continued 0400 00 INSPECTION-ACCEPTANCE AND REJECTION CRITERIA 1. Check links, shafts, and brackets for wear and damage. Replace if needed. ASSEMBLY NOTE Lubricate bearing surfaces of shafts before assembly. Use GAA grease. 1. Place outer transfer shaft (4) in transfer shaft bracket (5). 2. Insert inner transfer shaft (3) into outer transfer shaft (4). 3. Secure shaft (3) to bracket (5) with screw (2) and new locknut (1). FOLLOW-THROUGH STEPS 1. Install upper accelerator linkage (WP 0399 00). END OF TASK 0400 00-2