TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 843 of 1012
TM 9-2350-261-20-2 REPLACE UPPER ACCELERATOR LINKAGE — Continued 0399 00 INSTALLATION NOTE Lubricate rod end bearings before assembling. Use GAA grease (WP 0120 00). 1. Apply thin coat of antiseize compound to cleaned threads of three screws (4) and (8). 2. Install bracket assembly (3) on power plant. Secure with two screws (8), new lockwashers (9), and nuts (10). TIGHTEN SCREWS TO 300-324 LB-IN (34-37 N·M) TORQUE. Use torque wrench and socket wrench set. 3. Install screw (4) and new lockwasher (7) in bottom hole of bracket assembly (3). TIGHTEN SCREW TO 264-288 LB-IN (30-33 N·M) TORQUE. Use torque wrench and socket wrench set. 4. Position inner transfer shaft (5) and outer transfer shaft (6) in bracket assembly (3). Secure with screw (2) and new locknut (1). Use cross-tip screwdriver. 0399 00-3