TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 841 of 1012
TM 9-2350-261-20-2 REPLACE UPPER ACCELERATOR LINKAGE 0399 00 THIS WORK PACKAGE COVERS: Removal (page 0399 00-1). Installation (page 0399 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) Screwdriver Set (WP 0780 00, Item 65) Socket Wrench Set (WP 0780 00, Item 96) Torque Wrench (WP 0780 00, Item 102) M a t e r i a l s / P a r t s Antiseize compound (WP 0782 00, Item 8) Grease (WP 0782 00, Item 24) Cotter pin (2) Locknut (3) Lockwasher (3) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s WP 0401 00 WP 0120 00 E q u i p m e n t C o n d i t i o n Engine stopped/shutdown (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) Power plant rear access panel removed (WP 0431 00, WP 0432 00, or WP 0433 00) REMOVAL 1. Remove locknut (1) and screw (2). Disconnect throttle link (3) from governor throttle arm (4). Discard locknut. 2. Loosen screw (5). Remove governor throttle arm (4) from governor (6). 3. Remove cotter pin (7), washer (8), spring (9), and throttle link (3) from pin (10). Discard cotter pin. 4. Remove locknut (11) and screw (12). Disconnect throttle link (13) from bracket assembly (14). Discard locknut. 0399 00-1