TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 840 of 1012
TM 9-2350-261-20-2 REPAIR TRANSMISSION AND LOWER ACCELERATOR LINKAGE — Continued 0398 00 INSPECTION-ACCEPTANCE AND REJECTION CRITERIA 1. Check links, shafts, and brackets for wear and damage. Replace if needed. ASSEMBLY NOTE Lubricate connecting link rod-end bearings before installations. Use GAA grease. 1. Install transmission cross-shaft (1) in transmission cross-shaft bracket (2). 2. Install accelerator cross-shaft (3) in transmission cross-shaft (1). 3. Install woodruff key (4) in accelerator cross-shaft (3). 4. Install bellcrank (5) on accelerator cross-shaft (3). Secure with screw (6) and new locknut (7). 5. Install transmission shifting link (8) on transmission cross-shaft (1). Secure with screw (9) and new locknut (10). 6. Install throttle valve link (11) on bellcrank (5). Secure with screw (12) and new locknut(13). NOTE If any links were replaced or link ends turned, then adjust linkage (WP 0401 00). 7. Install throttle link (14) on bellcrank (5). Secure with screw (15) and new locknut (16). FOLLOW-THROUGH STEPS 1. Install transmission and lower accelerator linkage (WP 0323 00). END OF TASK 0398 00-2