TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 83 of 1012
TM 9-2350-261-20-2 REPLACE FAN DRIVE ADJUSTABLE IDLER AND PULLEY 0213 00 THIS WORK PACKAGE COVERS: Removal (page 0213 00-1). Installation (page 0213 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) Snap Ring Pliers (WP 0780 00, Item 45) Torque Wrench (WP 0780 00, Item 104) M a t e r i a l s / P a r t s Cotter pin (4) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s W P 02 11 00 E q u i p m e n t C o n d i t i o n Engine stopped/shutdown (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) Power plant rear access panel removed (WP 0431 00, WP 0432 00, or WP 0433 00) REMOVAL 1. Remove fan drive belts (WP 0211 00). 2. Remove bolt (1), nut (2), washer (3), and fan idler pulley (4) from idler pulley arm (5). 3. Remove cotter pin (6), headed pin (7), and adjustable rod end (8) from idler pulley arm (5). Discard cotter pin. 4. Loosen nut (9). Remove rod end (8) and nut (9) from adjusting nut (10). 0213 00-1