TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 826 of 1012
TM 9-2350-261-20-2 REPLACE DIFFERENTIAL STEERING BRAKE LEVERS — Continued 0394 00 CLEAN, INSPECT, AND REPAIR 1. Check levers. Replace levers with cracked or worn clevis pin holes. 2. Check levers. Replace levers with damaged or chipped splines. INSTALLATION 1. Install two levers (3) on differential brake lever shafts. Secure with two screws (2) and new locknuts (1). 2. TIGHTEN NUTS (1) TO 360-420 LB-IN (41-48 N·M) TORQUE. Use torque wrench. 3. Connect two differential links (WP 0393 00). 4. Adjust linkage (WP 0387 00). 5. Connect two return springs (WP 0387 00). FOLLOW-THROUGH STEPS 1. Close power plant front access door and raise trim vane (see your -10). 2. Operate steering levers to check that differential steering brake levers operate properly. END OF TASK 0394 00-2