TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 818 of 1012
TM 9-2350-261-20-2 REPLACE DIFFERENTIAL CROSS-SHAFTS AND BEARINGS — Continued 0392 00 REMOVAL 1. Disconnect two return springs (WP 0387 00). 2. Remove four cotter pins (1), clevis pins (2), and links (3) from differential and steering lever cross-shaft (4), cross-shaft (5), and link arm (6). Discard cotter pin. 3. Remove four screws (7), washers (8), and locknuts (9) that secure two bearings (10) to two brackets (11). Discard locknuts. 4. Remove two screws (12), four washers (13), and two locknuts (14) that secure bearing (15) and shim (16) to driver’s compartment bulkhead. Discard locknuts. 5. Remove differential and steering cross-shaft (4), cross-shaft (5), bearing (10), bearing (15), and link arm (6) from power plant compartment as a unit. 6. Remove screw (17), locknut (18), and link arm (6) from cross-shaft (4). Remove woodruff key (19) from cross-shaft. Discard locknut. 0392 00-2