TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 807 of 1012
TM 9-2350-261-20-2 REPAIR LEFT/RIGHT STEERING LEVERS — Continued 0389 00 6. Install right steering lever (1) on cross-shaft (2). Secure with new locknut (3), and screw (4). 7. Install bearing (5) in bracket (6) and secure with two retaining rings (7). Use snap ring pliers. 8. Install two quadrants (8) and stop levers (9) on bracket (6) with two screws (10) and new locknuts (11). NOTE The same number of shims removed will be installed. 9. Install bracket (6) on cross-shaft (2). Install shims (12) between bracket (6) and driver’s floor plate. Secure with two washers (13) and screws (14). 10. Install left steering lever (15) on cross-shaft (2). Secure with woodruff key (16), new locknut (17), and screw (18). 11. TIGHTEN LOCKNUT (17) TO 204-240 LB-IN (23-27 N·M) TORQUE. Use torque wrench. 0389 00-5