TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 794 of 1012
TM 9-2350-261-20-2 ADJUST STEERING LINKAGE — Continued 0387 00 4. Remove two cotter pins (3), clevis pins (4), and washers (5) from two clevises (6) and steering lever cross-shaft (7). Discard cotter pins. NOTE If holes in differential brake levers will not align with tapped holes in differential housing, loosen adjustment by turning brake adjusting nut to left until holes align. Re-adjust differential brakes (WP 0362 00). 5. Align holes in differential brake levers (8) with tapped holes in differential housing. Secure with two screws (9). 6. Lock steering lever (1) and steering lever (2) in front notch of quadrant (3). 0387 00-2