TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 789 of 1012
TM 9-2350-261-20-2 REPLACE TORSION BAR ANCHOR — Continued 0386 00 3. On all other carriers and torsion bar positions, install two pins (4) in anchor (2). Secure pins with two new cotter pins (5). Bend pins as shown. NOTE Cotter pins must not prevent 360 degree rotation of anchor pins. 4. Bend cotter pins (1) so they allow 360 degree rotation of anchor pins. FOLLOW-THROUGH STEPS 1. Install torsion bar (WP 0385 00). 2. Install power plant for second torsion bar anchor, right side only (WP 0131 00). 3. Install road wheel (WP 0371 00) (T130) or (WP 0372 00) (T150). 4 . Road test carrier to check that torsion bar anchor is installed properly (WP 0120 00). 5. Stop/shutdown engine (see your -10). END OF TASK 0386 00-3/4 blank