TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 779 of 1012
TM 9-2350-261-20-2 REPAIR T150 SPROCKET WHEEL AND TRACK ASSEMBLIES — Continued 0384 00 4. Place sprocket wheel assembly (2) on final drive (1). Secure with ten new self-locking screws (3). Have helper assist. 5. TIGHTEN TEN SCREWS (3) TO 170–190 LB-FT (231–258 N·M) TORQUE. Use torque wrench (WP 0780 00, Item 105). FOLLOW-THROUGH STEPS 1. Install track on drive sprockets (WP 0367 00). 2. Join track (see your -10). 3 . TIGH TEN T W O EN D C ON NECT OR BO LT S ( 9) TO 4 00– 430 LB-FT TO R QUE. Use torque wrench (WP 0780 00, Item 105). 4. Adjust track tension (see your -10). 5. Install track cover (WP 0365 00). END OF TASK 0384 00-3/4 blank (543–583 N·M) 6. Road test carrier to check that drive sprocket and cushion are installed correctly (see your -10).